- +86 5373151560
- +86 18162052962
- info@hightoptools.com
HT10B 1 Ton Mini Excavator with Cab
Need a 1-ton excavator that fits through a standard doorway? The HT10B’s undercarriage retracts to 930mm, so you can roll it right into a backyard or indoor room. The boom swings 60 degrees, and a 100kg counterweight keeps it planted when you’re digging next to a wall. All at factory-direct pricing. Get your quote today.
Built for Jobs Where a Big Machine Just Won’t Fit
The HT10B is a 1-ton mini excavator for jobs where a big machine just won’t fit – think backyards, indoor demo, or digging between buildings. You can narrow the tracks to 930mm, walk it through a standard garden gate, then spread them to 1000mm once you’re inside. No fence panels to remove. No door frames to knock out.
Small diggers tip easy – that’s just physics. So we bolted a 100kg iron block to the rear. It shifts the weight back, so the tracks stay flat when you’re yanking out roots or lifting a heavy bucket. The boom swings 60 degrees left and right too. That means you can dig right next to a wall and still dump into a cart without turning the whole machine around.
Runs on a Koop 192F diesel. Need EPA or EU compliance? We’ve got Briggs & Stratton or Yanmar options. Digs 1745mm deep. Swap the bucket for an auger, a rake, or a thumb – quick hitch makes it fast. Folds down low enough to roll through a standard doorway. Good for trenching, stumps, breaking concrete, or cleaning up a barn.
We used common parts – single-cylinder diesel, standard hydraulics – so you’re not hunting for weird components when something wears out. Steel is treated to fight rust. We ship factory-direct, no dealer markup. Tell us what you’re digging, and we’ll suggest the right bucket and options. contact us!
HT10B 1-Ton Mini Excavator – Quick Specs
| Parameter | Specification |
|---|---|
| Machine Dimensions (mm) | |
| Transport Length (A) | 2225 mm |
| Overall Width (B) | 930 mm |
| Upper Width (D) | 840 mm |
| Overall Height (C) | 2200 mm |
| Standard Track Shoe Width (F) | 180 mm |
| Track Gauge (E) | 750 mm |
| Shovel Height Above Ground (G) | 110 mm |
| Depth of Excavation of Bulldozer (H) | 200 mm |
| Tail Turning Radius (I) | 810 mm |
| Track Ground Length (J) | 890 mm |
| Track Length (K) | 1235 mm |
| Working Range (mm) | |
| Max. Digging Height (a) | 2605 mm |
| Max. Dumping Height (b) | 1750 mm |
| Max. Digging Depth (c) | 1745 mm |
| Max. Digging Reach (d) | 2915 mm |
| Min. Swing Radius (e) | 1415 mm |
| Max. Height at Min. Swing Radius (f) | 2060 mm |
| Performance | |
| Working Weight | 800 kg |
| Bucket Capacity | 0.02 m³ |
| Working Device Form | Backhoe |
| Gradeability | 30° |
| Main Components | |
| Engine | Koop / Briggs & Stratton |
| Main Valve | Beifang |
Can the Hightop HT10B walk through a standard backyard fence or house gate?
Yes. The adjustable hydraulic tracks compress down to just 830mm wide. Since most house doors and garden gates are at least 85cm wide, this 1 ton excavator glides inside smoothly without removing fence panels.
Why did you add an extra 100kg weight to the back of this mini excavator?
Lightweight diggers tend to rock or roll over when pulling roots. The 100kg rear iron ballast shifts the machine's balance backward, keeping the tracks flat and stable during heavy bucket operations.
What makes the boom swing feature important for residential landscaping projects?
Traditional fixed booms require you to twist the whole tractor to dump soil. The 60-degree boom swing lets you dig right next to a concrete wall while pivoting the arm to load a cart sideways.
What engine options are available for the HT10B?
The standard engine is a Koop 192F diesel. For markets with stricter emission requirements, we offer Briggs & Stratton and Yanmar options that meet EPA and EU standards. Choose based on your region's regulations.
How deep can the HT10B dig?
The HT10B has a maximum digging depth of 1745mm (1.75 meters) – deep enough for most residential utility lines, drainage, and foundation footings.
Is the HT10B easy to transport?
At 1000kg operating weight, the HT10B can be towed behind a standard pickup truck on a small trailer. No special permits or heavy-duty haulers required for most jurisdictions.
Request a Quote
Whether you are purchasing one machine for a specific project or sourcing equipment for your business, Hightop can discuss the required configuration before quotation.
Tell us what you need
Requirements
- Target application
- Tire preference
- OEM / ODM requirements
- Branding requirements
Order details
- Required attachment
- Quantity
- Destination country
Hightop can assist with
- Machine quotation
- OEM & ODM customization
- Export support
- Attachment configuration
- Bulk order & dealer cooperation
- Shipping assistance
- Technical Guides
