HT15 Pro Li Mini Excavator – Zero Emission, Indoor-Ready

  • Zero emission, silent operation – no fumes, no noise complaints.

  • 72V 150Ah lithium battery – full shift of clean power.

  • 930mm narrow body – fits through gates and doorways.

  • 1710mm digging depth – trenches, footings, drainage.

  • 1500mm turning radius – pivots in tight residential sites.

Torque That Keeps Digging – Without the Diesel Rattle

Electric excavators get a bad reputation for lacking power. The HT15 Pro Li doesn’t. The 72V 150Ah lithium battery feeds a 6.5KW permanent magnet synchronous motor that delivers full torque from the first second – no revving up, no lag, no waiting for the engine to warm up. You pull the lever, it digs. Simple. The difference is especially noticeable on cold mornings and at high altitudes, where diesel engines lose performance.

Work Where Diesel Can’t Go

Basements, greenhouses, food processing facilities, indoor demolition sites – these are places where diesel fumes are a health risk and a safety violation. The HT15 Pro Li produces zero emissions and runs quietly enough for ear-protection-free operation. No ventilation fans, no exhaust extraction, no complaints from building occupants. This is a machine that opens up new job opportunities that diesel operators simply can’t access.

Battery That Works as Hard as You Do

The 72V 150Ah lithium pack is built for intermittent job site work – trenching, loading, backfilling, repositioning. Lithium holds voltage better under load than lead-acid, so your digging power doesn’t drop off as the charge depletes. The battery management system protects against over-discharge, extends cell life, and monitors temperature so you’re not left stranded mid-job. Recharge overnight on a standard 10A charger – no special infrastructure required.

Hydraulic Performance That Doesn’t Get Tired

Electric drive doesn’t mean weak hydraulics. The HT15 Pro Li’s electric motor drives a hydraulic pump that delivers consistent flow and pressure for the boom, arm, bucket, and blade. The system runs at full capacity without the power curve of an internal combustion engine – no drop-off at high altitude, no fade during continuous digging. The hydraulic oil stays cooler because there’s no radiant engine heat, which means longer component life and less downtime.

CategorySpecification
Basic Specs
ModelHT15 Pro Li
Operating Weight1000 kg
Bucket Capacity0.02 m³
Working DeviceBackhoe
Climbing Capacity30°
Electric System
Battery TypeLithium Battery (72V 150Ah)
Motor Power6.5 KW
Motor TypePermanent Magnet Synchronous Motor
Dimensions
Transport Length2300 mm
Total Width930 mm
Upper Width990 mm
Overall Height (Cab Roof)2270 mm
Track Width180 mm
Track Gauge750 mm
Tail Swing Radius800 mm
Track Ground Length890 mm
Track Length1235 mm
Ground Clearance380 mm
Working Range
Max Digging Depth1710 mm
Max Digging Height2690 mm
Max Dumping Height1825 mm
Max Digging Radius2920 mm
Min Turning Radius1500 mm
Max Height at Min Turn Radius2110 mm
Dozer Blade
Blade Height Above Ground110 mm
Blade Digging Depth200 mm
How long does the battery last on a full charge?
The 72V 150Ah lithium battery is sized for a full day of intermittent digging and loading work. Actual runtime depends on workload – continuous heavy digging consumes more power than light trenching. The battery charges overnight on a standard charger and has no memory effect.
How quiet is the HT15 Pro Li compared to a diesel excavator?
Significantly quieter. The permanent magnet synchronous motor runs with minimal noise – no diesel clatter, no exhaust, no vibration. You can operate this machine indoors, in residential areas, and on noise-sensitive job sites without ear protection or noise complaints.
Can I tow the HT15 Pro Li with a pickup truck?
At 1000kg operating weight, the HT15 Pro Li tows behind a standard pickup on a small trailer. No special permits or heavy-duty haulers required for most jurisdictions.
How deep can the HT15 Pro Li dig?
Maximum digging depth is 1710mm (1.71 meters). Maximum digging height is 2690mm, and maximum digging radius is 2920mm – giving you wide coverage without constant repositioning.
What's the minimum turning radius?
The HT15 Pro Li has a minimum turning radius of 1500mm – tight enough for urban residential sites, basements, and narrow alleyways. Combined with the 930mm width, it's one of the most maneuverable electric excavators in its class.
What attachments can I use with the HT15 Pro Li?
The HT15 Pro Li accepts standard mini excavator attachments – digging buckets, hydraulic breakers, augers, grading blades, and grapples. Quick-hitch systems are available for fast attachment swaps. The electric system provides consistent torque for hydraulic attachments.
Is the HT15 Pro Li suitable for indoor demolition work?
Yes. Zero emissions, low noise, and 930mm width make it ideal for indoor demolition, basement work, and renovation projects. No ventilation required, no fumes, no noise complaints from neighboring units.

Request a Quote

Whether you are purchasing one machine for a specific project or sourcing equipment for your business, Hightop can discuss the required configuration before quotation.

Tell us what you need
Requirements
  • Target application
  • Tire preference
  • OEM / ODM requirements
  • Branding requirements
Order details
  • Required attachment
  • Quantity
  • Destination country
Hightop can assist with
  • Machine quotation
  • OEM & ODM customization
  • Export support
  • Attachment configuration
  • Bulk order & dealer cooperation
  • Shipping assistance
  • Technical Guides

Related Products

Shopping Cart

Let’s Build the Right Machine for Your Job

We’ll reply within 24 hours.

Get Specs & Custom Solution