HTM-62ZTR Zero-Turn Mower with 62-Inch Cutting Deck

The HTM-62ZTR zero-turn mower features a 27 HP LONCIN V-twin gasoline engine, 803 cc displacement and dual hydrostatic drive. Its 62-inch fabricated steel deck uses three cutting blades and four anti-scalp wheels. Eight cutting-height positions from 1.5 to 5 inches allow adjustment for different lawn-maintenance requirements. Side discharge is standard, with a separate optional mulching kit available.

 

The HTM-62ZTR is a 62-inch zero-turn lawn mower designed for regular maintenance of large lawns and commercial landscaped areas. Its 27 HP LONCIN V-twin gasoline engine, dual hydrostatic drive and fabricated steel cutting deck form the core of its configuration.

Engine and Drive System

The 803 cc LONCIN V-twin engine delivers a listed 27 HP. The dual hydrostatic drive system allows independent control of the drive wheels, supporting tight turns and maneuvering around trees, paths and other landscape features.

The listed maximum forward speed is 12 mph, while the maximum reverse speed is 6.5 mph. These values describe maximum travel speed rather than expected cutting output. Grass density, terrain, obstacles and operator technique all affect the pace of work.

Fabricated Steel Deck and Three-Blade Cutting System

The 62-inch cutting deck is made from heavy-duty fabricated steel and uses three blades. Four 5-inch anti-scalp wheels help reduce unwanted contact between the deck and uneven ground.

The cutting height ranges from 1.5 to 5 inches, with eight positions adjusted through a single lever. This gives operators a practical range for routine lawn care, but the correct height depends on the grass species, growth conditions and finish required.

Grass Discharge and Operator Features

Side discharge is the standard configuration. An optional mulching kit can be purchased separately for jobs where returning finely cut grass to the lawn is preferred. Grass height, moisture and mowing frequency should be considered when choosing between these methods.

The operator area includes a high-back seat with 11 adjustment positions, adjustable control-handle positions, headlights, an hour meter and a cup holder. The machine also lists an operator-controlled mowing-in-reverse function. Always follow the operating manual and site safety procedures.

Maintenance and Purchasing Considerations

The listed fuel tank capacity is 25 L, engine oil capacity is 2.4 L, and recommended engine oil is SAE 10W-30. Parts lists and a product manual are available. Before purchase, confirm the maintenance schedule, service parts, applicable commercial warranty and exact supplied configuration.

Discuss Your Requirements with Hightop

When requesting a quotation, include your destination country, order quantity, intended application and preferred grass-discharge method. We can confirm the current configuration, optional equipment, packaging and shipping details for the HTM-62ZTR.

SpecificationHTM-62ZTR
Product TypeZero-Turn Lawn Mower
Engine BrandLONCIN
Engine TypeV-Twin Gasoline Engine
Engine Power27 HP
Engine Displacement803 cc
Drive SystemDual Hydrostatic Drive
Cutting Width62 inches
Cutting DeckHeavy-Duty Fabricated Steel
Number of Blades3
Anti-Scalp Wheels4
Deck Wheel Size5 inches
Cutting Height Range1.5–5 inches
Cutting Height Adjustment8 positions, 0.5-inch increments
Height Adjustment ControlSingle Lever
Maximum Forward Speed12 mph
Maximum Reverse Speed6.5 mph
Standard Cutting MethodSide Discharge
MulchingOptional Kit, Sold Separately
Fuel Tank Capacity25 L
Engine Oil Capacity2.4 L
Recommended Engine OilSAE 10W-30
PTO / Blade EngagementManual
SeatHigh-Back Seat, 11 Adjustment Positions
Front Tires15 × 6 inches
Rear Tires22 × 10 inches
Additional FeaturesHeadlights, Hour Meter, Cup Holder
Mowing in ReverseOperator-Controlled Function
Commercial UseListed as Commercial Duty
Overall Dimensions91 × 72.5 × 74 inches
Packaging MethodPalletized
Container-Loading Crate Dimensions78 × 66 × 36 inches
Wooden Sample Package Dimensions85 × 67 × 38 inches
Loading Quantity — 40′ HQ27 units
Parts and DocumentationParts List and Manual Available
Commercial WarrantyAvailable; Confirm Applicable Terms
Product ColorOrange / Gray

Request a Quote

Whether you are purchasing one machine for a specific project or sourcing equipment for your business, Hightop can discuss the required configuration before quotation.

Tell us what you need
Requirements
  • Target application
  • Tire preference
  • OEM / ODM requirements
  • Branding requirements
Order details
  • Required attachment
  • Quantity
  • Destination country
Hightop can assist with
  • Machine quotation
  • OEM & ODM customization
  • Export support
  • Attachment configuration
  • Bulk order & dealer cooperation
  • Shipping assistance
  • Technical Guides

Related Products

Shopping Cart

Let’s Build the Right Machine for Your Job

We’ll reply within 24 hours.

Get Specs & Custom Solution