HTSC2.0 2 Ton Crawler Spider Crane for Compact Lifting

HTSC2.0 Crawler Spider Crane for Space-Limited Lifting

The HTSC2.0 2 ton crawler spider crane is a compact lifting machine built around a crawler chassis, telescopic boom and spider-type outrigger arrangement. With a 2T rated capacity, 6m maximum operating radius and 6.5m maximum above-ground lift, it is suited to lifting and installation work where equipment size and working space need to be considered together.

The machine has a vehicle size of 2780mm × 710mm × 1620mm and a self-weight of 1.8T. Its compact dimensions can be relevant for projects involving restricted access, indoor work areas and other space-limited lifting requirements.

Telescopic Boom and Adjustable Outriggers

The HTSC2.0 uses a 2m × 4-section telescopic boom, with a boom length of 6.5m and a specified boom extension time of 20 seconds. The boom angle can be adjusted from 0–78°, with a listed luffing time of 13 seconds.

Its outrigger system uses manual screw-out and hydraulic automatic support, with three-section retractable legs. The specified maximum extension amplitude is 3620mm in length × 3440mm at the rear × 3470mm at the front. This configuration allows the working support arrangement to be adjusted according to the available operating area.

Crawler Travel and 360° Continuous Rotation

The crawler chassis uses hydraulic drive, with a travel speed of 0–2.5km/h and a stated gradeability of 25° (36%). The track specification is 180mm width × 72mm pitch × 37 sections.

For lifting positioning, the crane provides 0–360° continuous rotation, with a listed rotation time of 60 seconds. The combination of crawler travel, adjustable outriggers and continuous rotation gives buyers several configuration points to consider when assessing a lifting application.

Gasoline, Electric and Optional Configurations

The supplied product information lists a Honda 390CC gasoline engine, with electric/manual starting and a 12V 60AH battery. The standard configuration also states that the gasoline engine can be replaced with a diesel engine. An AC380V electrical specification is provided, while the product materials also show a diesel-electric hybrid system. Buyers should confirm the exact power configuration required for the ordered machine.

Manual operation and manual travel are specified as standard operating methods, with remote control operation available as an option. The supplied customization material also shows options such as torque limiter, remote control, gondola/cable car, hydraulic flying jib and multiple machine colors.

Applications for the HTSC2.0

The supplied application material presents the HTSC2.0 for narrow-space operations including highway and bridge projects, urban construction, shopping mall construction and elevator shafts. Other supplied product materials show lifting and installation scenarios in building environments, indoor areas and rooftop work.

For B2B buyers, the key selection points are the required lifting load, working radius, lifting height, available support area, power configuration and optional equipment. The supplied lifting weight chart should be checked against the actual operating radius and boom angle before confirming a lifting configuration.