HT-YL700A/C for Heavy-Duty Compaction on Small Sites

More Drum Coverage Without Moving to a Full-Size Roller

Some road maintenance and construction jobs need more compaction coverage than a compact walk-behind roller can provide, while a full-size machine would be unnecessary. The HT-YL700A/C uses a 700 mm steel wheel and 520 kg working weight to give contractors a heavier hand-operated configuration for localized compaction work.

Built Around a Wider Working Drum

The 700 mm steel wheel has a diameter of 530 mm. Combined with a maximum travel speed of 0–4 km/h, the configuration is suited to controlled passes on asphalt, gravel, sand and engineering foundations. The machine is also rated with 20 kN excitation force, 75 Hz vibration frequency and 0.5 mm nominal amplitude.

Two Engine Configurations for Different Procurement Requirements

HT-YL700A/C is listed with either a Honda GX270 or Changfa CF178FE gasoline engine. The stated power is 9.0 HP or 6.0 HP at 3600 rpm. This gives dealers and contractors two listed engine configurations to discuss according to their market and purchasing requirements, without changing the core roller specifications.

Hydraulic Travel for Tight-Site Maneuvering

The roller uses a hydraulic pump and motor for actuation. Its two-way hydraulic walking system is intended to support forward and reverse movement with a small working radius. A two-speed control arrangement and one-key vibration system provide a straightforward operating layout for routine compaction tasks.

Where a 520 kg Roller Fits Into a Contractor’s Fleet

For small road repair teams, paving contractors, landscaping crews and rental businesses, the HT-YL700A/C can be evaluated where a wider drum and higher working weight are useful. Its 30% climbing ability also gives buyers a defined specification for comparing equipment against site access requirements.

Confirm the Machine Configuration Before Export Purchase

International buyers can request a quotation based on the preferred engine configuration, order quantity and destination. Export packaging measures 1160 × 950 × 1250 mm. Spare parts support, shipping arrangements and dealer cooperation can be discussed as part of the purchasing process.